Monday, November 2, 2015

कार्तिक २६ देखि २९ गतेसम्म पोखरामा ‘स्काई डाइभ’

Sky-Dive-Pokhara-6
सुन्दर प्राकृतिक दृश्यावलोकन गर्दै ‘स्काई डाइभ’को मज्जा लिन चाहानुहुन्छ ? यदि चाहानुहुन्छ भने स्काई डाइभको बुकिङ खुलेको छ, छिट्टै आफ्नो सिट सुरक्षित गर्नुहोस् ।
एक्स्पोलोर हिमालयले कार्तिक २६ देखि २९ गतेसम्म पोखरामा ‘स्काई डाइभ’ गराउने भएको छ । स्काई डाइभका लागि बुकिङ खुल्ला गरिसकेको कम्पनीका प्रबन्ध निर्देशक सुमन पाण्डेले जानकारी दिए । स्काई डाइभ गर्नका लागि एकजनाले ७५ हजार रुपैयाँ तिर्नुपर्ने हुन्छ । यो शुल्कमा फोटो र भिडियो उपलब्ध हुनेछ । हेलिकप्टबाट उडाउनुपर्ने हुँदा स्काई डाइभ महंगो पर्न गएको पाण्डेको भनाई छ ।
Sky-Dive-Pokhara-4
‘हामीले यस वर्ष २० जनालाई स्काई डाइभ गराउने सोँचाइमा छौं’ पाण्डेले भने- ‘अहिलेसम्म १५ जनाले बुकिङ गरिसकेका छन् ।’ उनका अनुसार अहिलेसम्म बुकिङ लिनेमा ५ जना नेपाली रहेका छन भने १० जना इन्डियन र इन्डियामा बस्ने विदेशी रहेका छन् ।
स्काई डाइभ विश्वका साहसिक मनोरञ्जनात्मक खेलहरुको सूचीमा पहिलो नम्बरमा पर्छ । एक्स्पोलोर हिमालयले सन् २०१० देखि पोखरामा वर्षको एक पटक स्काई डाइभ गराउँदै आएको छ । कम्पनीले सगरमाथामा पनि स्काई डाइभ गराउने गर्छ ।
Sky-Dive-Pokhara-5
फिस्टेल हेलिकप्टरमा १२ हजार फिट माथि लगेर स्काई डाइभ गराइने छ । स्काई डाइभमा चार मिनेटको हेलिकप्टर यात्रा हुनेछ भने ३५ देखि ४० मिनेट आकाशमा फ्रि फल हुनेछ । यो बेलामा जिन्दगीकै नौलो अनुभव हुने पाण्डेले बताए ।
पोखरामा गरिने स्काई डाइभ व्यक्तिगत नभएर त्यान्डम डाइभ हो । त्यान्डम मास्टरसँग टाँसिएर आकाशमा उड्नुपर्छ । स्काई डाइभ गरेपछि पोखराको पामेदेखि पश्चिममा पर्ने लौरुकमा झरिन्छ । स्काई डाइभ गराउन विदेशबाट प्राविधिकहरु आउनेछन् । स्काई डाइभमा युवाहरुको आकर्षण बढी देखिएको पाण्डेको भनाई छ ।
Sky-Dive-Pokhara-2
अन्य साहसिक खेलको तुलनामा स्काई डाइभ मंहगो पर्ने हुँदा सबैको पहुँच पुग्दैन् । ‘हामीले हेलिकप्टरमा राखेर उडाउनुपर्ने हुँदा महंगो पर्न गएको हो’ पाण्डेले भने- ‘विदेशमा सिंगल इञ्जिन जहाजबाट उडाउँछन्, त्यसो हुँदा त्यहाँ ४० हजारमै स्काई डाइभ गर्न पाइन्छ ।’
हेलिकप्टरबाट उडाउनुपर्ने हुँदा सिमित संख्यामा मात्र स्काई डाइभ गराउनुपरेको पाण्डेले बताए । विस्तारै नेपालमा पनि सिंगल इञ्जिन जहाजबाट स्काई डाइभ गराउने योजनामा रहेको उनको भनाई छ । यसो भएमा लागत केही कम पर्नेछ ।
विदेशमा स्काई डाइभ सस्तो भएपनि नेपालमा जस्तो मनोरञ्जन लिन नसकिने पाण्डे बताउँछन् । नेपालमा स्काई डाइभ गर्दा गगनचुम्बी सेता हिमाल, सुन्दर हरियाली डाँडा, पोखरा शहर, ताल लगायतका दृश्यावलोकन गर्न पाइन्छ ।
युवाहरुको आकर्षण बढेको हुँदा स्काई डाइभ वर्षभरी नै गराउने उद्देश्य एक्स्पोलोर हिमालयको छ । यसो गर्न सकेमा साहसिक खेलमा रुची राख्ने विश्वका धनाढ्य पर्यटकहरु भित्राउन सकिन्छ । पोखरामात्र नभएर हिमालका काठमा समेत स्काई डाइभ गर्न सकिने हुँदा यसको भविष्य निकै उज्जल रहेको छ ।

Monday, October 12, 2015

वीपीपछि भिजन भएका नेता बाबुराम हुन् : रामेश्वर खनाल

'नेपालले चीन, सिंगापुर र कोरियाबाट सिक्नुपर्छ'

२०७२ वैशाख १० गते २०:२८ मा प्रकाशित
 33.7K  107 
  8
१० वैशाख, काठमाडौं । आर्थिक विश्लेषकसमेत रहेका पूर्वअर्थसचिव रामेश्वर खनालले वीपी कोइरालापछि डा. बाबुराम भट्टराईलाई आफूले भिजन भएको नेताका रुपमा पाएको बताएका छन् ।
BP-Koirala-and-Baburam-Bhat
वीपी र बाबुरामबाहेक अन्य प्रधानमन्त्रीहरुमा आफूले भिजन नदेखेको खनालको तर्क छ । नेपालमा लोकतन्त्रको पुनस्थापनापछि पनि किन विकासले फड्को मार्न सकेन भन्ने विषयमा विश्लेषण गर्ने क्रममा खनालले नेपालमा सिंगापुर र दक्षिण कोरियामाजस्तो ‘भिजनरी’ नेतृत्वको खााचो औंल्याए । चाहने हो भने प्रधानमन्त्रीले देशमा कायापलट गर्न सक्ने खनाल बताउँछन् ।
नेपालको राजनीतिक नेतृत्वबारे खनालको विश्लेषण :
हाम्रो राजनीतिक नेतृत्वमा गम्भीरता पनि छैन । सोच पनि छैन । ठूलो खडेरी के हो भने सोच नै छैन । पाँच-पाँच पटक मुलुकको प्रधानमन्त्री भइसकेको व्यक्तिले म कुनै दिन बिरामी परौंला, मेरो उपचार गर्नका निम्ति भए पनि राम्रो अस्पताल चाहिन्छ भन्ने मात्रै सोच लिएको भए पनि पुग्थ्यो । त्यही भिजन भएको भए पुग्थ्यो ।
नेपालमा ‘टर्न एराउण्ड’ एक व्यक्तिले मात्रै गर्न सक्छ । तर, हामी कहाँ नेतृत्वमा भिजन नहुनु ठूलो समस्या हो ।
राजनीतिक नेतृत्वले भिजन लिने हो । चीनमा आर्थिक वृद्धि भएको कर्मचारी र प्राविधिकले गर्दा होइन नि । नेतृत्वले के भन्यो भने मलाई यो चाहिन्छ, तपाईले डेलिभरी गरेर देखाउनुस् ।
ल्हासासम्मको रेल्वे ट्रयाक कुन आर्थिक विश्लेषकले, कुन प्राविधिकले यो आर्थिकरुपमा सम्भव छ भनेर भनेका थिए र ? ल्हासा सानो बस्ती, त्यत्रो खर्च गरेर रेलवे ल्याउनुपर्ने । कसैले पनि सम्भव भन्दै भन्दैन ।
राजनीतिक नेतृत्वले के गर्ने हो भने मलाई सम्भाव्यको मतलब छैन, मलाई यो चाहिन्छ । राजनीतिज्ञले टाढाको देख्न सक्नुपर्छ । पहिलोपटक प्रधानमन्त्री हुँदा नै मलाई उपचार गर्न अस्पताल चाहिन्छ भनेर देख्न सक्नुपर्थ्यो  नि । पाँच पटक प्रधानमन्त्री हुँदा पनि उहाँले देख्न सक्नुभएन । प्रत्येकपटक विदेशमा गइरहनु भयो । भिजनको कमी ।
भिजन भएका नेता वीपीपछि बाबुराम
मैले देखेको त अहिलेसम्म बीपी कोइराला र अहिले आएर बाबुराम भट्टराईमात्र हो । आग्रह पूर्वाग्रह, माया गरेको भनेको होइन । उहाँले चाहिँ कम से कम यो चाहिन्छ है भनेर अलिकति हेर्न सक्नुभएको छ । अरु कसैको भिजन नै छैन । थुप्रै प्रधानमन्त्रीसँग मैले काम गरेँ । उहाँहरुकै अन्तरगत काम नगरे पनि कामको शिलसिलामा विकासको मुद्दामा, नीतिगत कुरामा उहाँहरुसँग पटक-पटक भेट र बैठक भए । कसैले पनि भिजनरी कुरा गरेनन् ।
यदि आफूले भिजनरी कुरा गर्न सकिन्न भने अरु कसैले भनेको भिजन पनि मानिदिन सकिन्थ्यो । अलिकति भिजन भएको मान्छेले अरुको भिजन पनि बुझ्न सक्छ । आफ्नो भिजन नै नभएपछि के बुझ्ने ?
विकास सम्वन्धी भिजन त सबैमाथि माथिल्लो नेतृत्व (प्रधानमन्त्री) बाट आउने हो । भारतको गुजरातमा थुप्रै मुख्यमन्त्री भएका थिए नि । तर, भिजनरी आएपछि त ‘टर्न अराउन्ड’ हुँदो रहेछ त । गुजरातमा कर्मचारीतन्त्र त्यही थियो । मोदी पहिलोपटक जाँदा कर्मचारीतन्त्रमा आमूल परिवर्तन पनि गरेका होइनन् ।
गिरिजाबाबुले ०४८ मा माथिल्लो तहलाई धपाएर फ्रेसब्लड ल्याउने कोसिस गर्नुभयो । तर, मोदीले त्यसो पनि गरेनन् । यसले के देखाउँछ भने नेतत्व तहमा रहेको एक व्यक्तिले ड्राइभ र भिजन दियो भने सबैतिर काम हुन्छ । यस्तो भिजन र ड्राइभ मन्त्रीहरुबाट आउँदैन । मन्त्री जतिसुकै भिजनरी भए पनि आफ्नै मन्त्रालयको काम गर्न पनि गाह्रो हुन्छ । किनभने सचिव त प्रधानमन्त्रीले खटाउने हो नि ।
RAMESHOR KHANAL (16)
नेपालमा ‘टर्न एराउण्ड’ एक व्यक्तिले मात्रै गर्न सक्छ । विश्वमा जुन देशको ‘टर्न एराउण्ड’ भएको छ, त्यो देशमा आइन्स्टाइन वा कुनै ठूलो वैज्ञानिक जन्मिएका कारणले टर्न एराउण्ड भएको होइन ।
चीनमा तेङ स्याओ पिङ पावरमा आउँदा माओका पालाका राजनीतिज्ञहरु पनि त्यहीँ थिए । चाटुकारहरु । उनले भिजन लिए र मलाई यो चाहिन्छ, भने । इफ यु कान्ट डेलिभरी, तपाई जानुस्, म अर्को ल्याउँछु ।
हाम्रा कुनै पनि प्रधानमन्त्रीले मैले यो भिजन लिएको छु, तपाईले यो यो काम गर्नुपर्छ, गर्न सक्नुहुन्न भने तपाई जानुहोस् भनेर कसैलाई भन्न सके ? बरु त्यस्ता (काम नगर्ने) व्यक्तिलाई नियुक्तिको समयावधि थप गरिदिए ।
हामी कहाँ नेतृत्वमा भिजन नहुनु ठूलो समस्या हो । यो समस्याबाट हामी अझै केही वर्ष गुज्रन्छौं । किनभने, भिजनरी मान्छे देखिएका छैनन् । कुनै दलको गर्भमा लुकेर बसेको होला । जसलाई हामीले अहिले भिजनरी होला कि भनेका छौं, गगन थापा, गोकर्ण विष्टहरु । बाहिर बस्दा पो भिजनरी देखिएको हो, पदमा बस्दा हुनुपर्‍यो नि । पदमा गएर ड्राइभ गर्न सक्ने हुनुपर्छ ।
धेरै प्रधानमन्त्रीहरु पदमा गएपछि सानो कुरा गर्नुबाहेक ठूलो कुरा गर्ने क्षमता छैन ।
राजनीतिक भिजनले समाजको व्यवहारमा परिर्वतन ल्यायो भने विकास पनि तीव्र गतिले अघि बढ्छ । विकास भएपछि समानता आउँछ । आजको मितिसम्म पनि ४० प्रतिशत घरहरुमा शौचालय छैन । सही तरिकाले हाम्रो दिशा पिसाबलाई व्यपस्थापन गर्नुपर्छ, यो भयो भने हाम्रो स्वाथ्य राम्रो हुन्छ, हामीलाई रोग लाग्दैन भन्ने सन्देशसमेत पुर्‍याउन सकेका छैनौं । यो हाम्रो समाजको संरचनात्कगत समस्या हो । त्यो वर्गको मान्छे र अत्याधुनिक सेवा सुविधा प्रयोग गर्न जान्ने मान्छेको आर्थिक हैसियत पनि फरक हुन्छ । किनभने यसको उत्पादकत्व बढी हुन्छ । अर्कोको कम हुन्छ किनकि उसले त एक महिना झापाडखाला लागेर काम गर्न सक्दैन ।
हाम्रो समाजमा परम्परागत र आदिम युगीन बस्तीहरु भएका ठाउँ अझै पनि छन् । ०४६ सालसम्म कम गर्ने प्रयास गरेनौं । त्यसबेला ३६/३७ जिल्लामा सडक नै पुगेको थिएन । यो अवधिमा सक्दो प्रयास गर्दा पनि तीन जिल्लामा पुग्न सकेको छैन, गाविसको त कुरा छाडौं तर, पछिल्लो अवधिमा सदरमुकाममा नपुगे पनि गाविसहरुमा भने पुगेका छन् ।
जब समाज चेतनशील हुँदैन, उसले दाबी गर्न सक्दैन । विकासका लागि क्लेम पनि गर्नुपर्छ । हामीले वीचमा विकास भनेको ‘राइट्स बेस अप्रोच’ अर्थात अधिकारमा आधारित विकासको धारणा भन्यौं । जसको अधिकार हो, उसकहाँ विकास पुग्नुपर्छ भनेको हो । त्यो अधिकार दिएर कसैको निगाहले पुग्ने होइन, माग्ने हो । म कर तिर्छु भने मेरो घरको ढोकामा सडक पुग्नुपर्छ भन्ने हाम्रो अधिकार हो । हामीकहाँ त घर बनाएर बाटो पुग्दैन । किनकि घर बनाउनेले कर पनि तिरेको हुँदैन ।
हाम्रो सामाजिक संरचनाले नै विभेद बनाइरहन्छ र यो अझै २० वर्ष भइरहन्छ । यो विभेद कम गर्न समाजिक संरचनामा रहेको समस्या समाधान गर्नुपर्छ भन्ने मान्छे सम्भवतः एकजना बाबुराम भट्टराई होला । अरु मैले देखेको छैन । केको राजनीतिक तहबाट सुधारको कुरा गर्ने ? त्यसले ०६२/०६३ पछि सामाजिक असमानता कम भयो होला भनेर कल्पना गर्न हुँदैन । त्यसले अबको १०/१५ वर्ष रहन्छ ।
यदि राजनीतिक नेतृत्वले त्यो जेहाद छोड्ने हो भने फेरि सम्भव छ । यो भनेेको के हो भने सन्देश दिने हो । भारतमा मोदीले गरे, भारत सफा करो । त्यो सन्देश हो । जस्तो चीनमा राजाले कसैले पनि आजको मितिदेखि नउमालेको पानी खान पाउँदैनौं भनेर भनेका रहेछन् । अहिलेसम्म पनि कुनै चिनियाँले चिसो पानी खाएको देख्नु भएको छ ? छैन । उमालेको पानी खाँदा मात्र पनि उनीहरुको रोग आधा कम भयो । त्यो राजाको उर्दी थाइ राजाले थाहा पाए । उनले घरमा चिसो पानी खान पाइँदैन भनेर उर्दी जारी गरेका छन् । अहिले नेपालमा सबैले उमालेको पानी खानेको हो भने झाडा पखालाको समस्या ९० प्रतिशत घट्छ ।
कति विश्वविद्यालय बने, कति अस्पताल बने जस्ता कुराहरु क्षेत्रगत विकासको कुरा हुन् । क्षेत्रगतको छाड्नुस्, सिंगल भिजन, ब्रोड भिजन हुन्छ नि म मेरो देशलाई यस्तो बनाउँछु । उल्लु नै भएपनि राजा वीरेन्द्रले एसियाली मापदण्डमा पुर्‍याउँछु भनेको जस्तो । कृष्णप्रसाद भट्टराईले सिंगापुर जस्तो बनाउँछु भनेको जस्तो । त्यतिको भिजन पनि भइदिए हुन्थ्यो । त्यो केही छैन । कसैको पनि छैन । सानो कुरा गर्नुहुन्छ ।
अहिलेसम्मका प्रधानमन्त्रीले कति आर्थिक सहायता बाँडेका छन्, त्यो सूची हेर्नुस् । जसले बाँड्यो त्यो प्रधानमन्त्रीको भिजन छैन भनेर बुझेहुन्छ ।
लोकेन्द्रबहादुर चन्दले, बैतडीको मान्छे, विरामी भएछ, ५ लाख रुपैयाँ भनेर आए । अर्थमन्त्री डा. बद्रीप्रसाद श्रेष्ठ । सँधै पास हुने भएपछि एकदिन म आफैं गएँ । श्रेष्ठजतिको इमान्दार मान्छे कोही थिएनन् । मन्त्रालयको पैसाबाट चिया नखाने । सरकारको पैसा खर्च हुन्छ भनेर एसियाली विकास बैंकको साधारण सभामा समेत जानुभएन । त्यस्तो भन्ने उहाँ, उहाँकै प्रधानमन्त्री लोकेन्द्रबहादुर चन्द । उनले चिर्कटोमा लिएर आएर ५ लाख रुपैयाँ फलानोलाई, २ लाख रुपैयाँ फलानोलाई । भिजन भनेको यस्तो छ । प्रत्येक प्रधानमन्त्रीले पैसा बाँड्ने बाहेक भिजन बनाएनन् ।
मुलुकको कार्यकारी प्रमुखले त पैसा बाँड्नुपर्ने अवस्था आउन नदिन पो सोच्नुपर्ने हो त । उसलाई किन पैसा चाहियो भन्दा उपचार गर्न हो नि । सबैलाई उपचारमा सहज पहुँच हुने अवस्था बनाउनेतिर काम सुरु गरौं न । क्यान्सर फ्री गरौं । एउटा व्यक्तिलाई सुविधा दिन प्रधानमन्त्री बन्ने होइन नि ।
यदि एउटा व्यक्तिलाई संकट परेका कारण सरकारले ५ लाख रुपैयाँ दिनु परेको छ भने यस्तो संकट त अरुलाई पनि परेको होला । सबैलाई संकट नआउने नीति पो सोच्ने हो । अहिलेसम्मका प्रधानमन्त्रीले कति आर्थिक सहायता बाँडेका छन्, त्यो सूची हेर्नुस् । जसले बाँड्यो त्यो प्रधानमन्त्रीको भिजन छैन भनेर बुझेहुन्छ ।
नेपालमा अहिलेको समस्या भनेको दिर्घकालीन सोचको हो । राजनेताले यस्तो कुरा देख्छ, जुन कुरा आम मानिस र बुद्धिजिवीले पनि देख्न सक्दैन ।
यसको उदाहरण के हो भने, हा जुन चाङ भन्ने कोरियन अर्थशास्त्री छन् । उनले ४/५ वटा पुस्तक लेखेका छन् । एउटामा के लेखेका छन् भने कोरियामा १९६५ मा पार्क चुङ ही सत्तामा आएपछि उनले ५ वर्षभित्र मैले मेरो देशको वर्षमा प्रतिव्यक्ति डलर हजार रुपैयाँ पुर्‍याउँछु भनेर भिजन बनाए । जुनबेला कोरियाको प्रतिव्यक्ति आय ८० डलर थियो । तर, उनले केही हेरेनन् । भिजन भनेको कतिपय बेलामा पागलजस्तो पनि लाग्छ । ८० बाट १००० पुर्‍याउन असम्भव भनेर आलोचना भयो । पढ्दै नपढेको, अर्थशास्त्र नबुझेको पनि भने । तर, १९७० मा १२०० डलर पुग्यो ।
त्यसपछि पार्कलाई के लाग्यो भने देशलाई विकास गर्ने हो भने स्टील फ्याक्ट्री चाहिन्छ । युरोपको विकासका पछाडि स्टिल र कोइला हो । पार्कले विश्व बैंकलाई लोनका लागि आग्रह गरे । तर, फलाम पनि छैन, बजार पनि छैन । आईआरआर निकाल्यो, त्यो त एकदमै कम । विश्व बैंकले भन्यो, सम्भव छैन ।
पार्क चुङ हीले नगरी हुँदैन भने । जापान उसको उपनिवेशमा बसेको भएकाले केही दिन्छ कि भनेर गए । त्यसबेला जापान स्टीलको पावर हाउस थियो । जापानले हुन्छ ,सहयोग गर्छु त भन्यो तर, टोली गएर हेर्दा विश्व बैंकले जस्तै सम्भव छैन भन्यो ।
प्रधानमन्त्रीले पटक-पटक मलाई काठमाडौ सफा चाहिन्छ, एकजना मान्छेले पनि फोहोर पारेको म देख्न चाहन्न भनेर आर्मी, पुलिस, नागरिकलाई भन्ने हो भने सम्भव छ ।
त्यसपछि पार्क चुङ हीले हामीले जसरी पनि बनाउने र हाम्रै पैसाले बनाउने भनेर आर्मीको रिटायर कमाण्डरलाई कार्यकारी प्रमुख बनाएर पोस्को स्टिल कम्पनी स्थापना गरे । आर्मीको मान्छेलाई ल्याएर सीइओ बनाएको भनेर विश्व बैंकले उल्लीबिल्ली बनायो । तर, पाँच वर्षमा पोस्को सफल एवं नाफमुखी कम्पनीमा परिणत भयो । अहिले पोस्को संसारको सबैभन्दा ठूलो र नाफामा भएको स्टील फ्याक्ट्री हो । कोरियामा फलाम खानी थिएन, स्टिलको बजार पनि थिएन ।
यस्तो भिजन अरुबाट आउँदैन । प्रधानमन्त्रीले सक्छन् । एउटा सफल भएपछि अरुमा त लहर लाग्छ ।
प्रधानमन्त्रीले पटक-पटक मलाई काठमाडौं सफा चाहिन्छ, एकजना मान्छेले पनि फोहोर पारेको म देख्न चाहन्न भनेर आर्मी, पुलिस, नागरिकलाई भन्ने हो भने सम्भव छ । तर, त्यो भिजन मुख्य सचिव वा अरु कसैले दिएर हुँदैन । उसलाई कतिजनाले टेर्ने ? प्रधानमन्त्रीले भन्ने हो भने त कार्यकर्ता दौडिन्छन् ।
मैले एकपटक डा. बाबुराम भट्टराईलाई भनेको थिएँ कि तपाईहरुले द्वन्द्वकालमा हाम्रो जहाँ आधार इलाका छ, त्यहाँका कुनै पनि बालबालिका घरमा बस्न पाइँदैन भनेको भए जम्मै एसएलसी गर्ने अवस्थामा पुग्थे, सबै पढ्थे । शिक्षकले विहान ८ बजेदेखि साँझ ६ बजेसम्म पढाउनुपर्छ भनेको भए त्यहाँका बालबालिका बोर्डफस्ट हुन सक्थे । त्यो एउटा उर्दीले हुन्छ । राजनीतिक नेतृत्वले भिजन दिने हो भने उर्दी पालना गर्ने मान्छे हुन्छ । सिंगापुरमा गरेको ड्राइभ त्यही हो ।
त्यस्तो भिजन टेक्नोक्र्याट, विदेशीबाट आउँदैछ । राजनीतिक नेतृत्वले दिने हो । टप लेभलले नदिएसम्म हुँदै हुँदैन ।
(कुराकानीमा आधारित)
- See more at: http://www.onlinekhabar.com/2015/04/269576/#sthash.bh1pbaMw.dpuf

Thursday, October 1, 2015

७५ वटै जिल्लाका प्रहरी कार्यलयहरूको ड्युटि अफिसर हरूको फोन र मोवाइल number

थाहा पाइ राखाै ७५ वटै जिल्लाका प्रहरी कार्यलयहरूको ड्युटि अफिसर हरूको फोन र मोवाइल number
कुनै समस्या परेमा चुपलागेर बस्नु भन्दा समयमा नै सम्बन्धित निकायमा खवर गरे चाडैसामधान हुन सक्छ थाहा पाइ राखाै ७५ वटै जिल्लाका प्रहरी कार्यलयहरूको ड्युटि अफिसर हरूको फोन र मोवाइल number
Note :-कृपया सेर गर्न नभुल्नु होला🏻
जिल्ला कार्यलय मोवाइल number
तेह्रथुम 026-460100 9852060199 9852095555 9851059655
धनकुटा 026-520100 026-520698 9852035555 9851127948
संखुवासभा 029-560100 9852090181 98520755555 9851281334
भोजपुर 029-420199 9852090148 9852015555 9851281301
सुनसरी 025-560100 9852090127 9852085555 9851280212
मोरङ्ग 021-530358 9852026750 9852005555 9851052263
झापा 023-456100 9852671555 9852615555 9851280424
इलाम 027-520100 9852690030 9852605555 9851131978
पाँचथर 024-520100 9852681122 9852625555 9852690001
ताप्लेजुङ्ग 024-460199 9852690052 9852635555 9851091116
सप्तरी 031-520055 9852890270 9852855555 9851030589
सिराहा 033-520005 9852890044 9852865555 9851280067
उदयपुर 035-420199 9852835277 9852815555 9851280840
खोटाङ्ग 036-420199 9852805555 9851080359
अोखलढुङ्गा 037-520199 9852890050 9852875555 9841355106
सोलुखोम्वु 038-520199 9852825555 9852825555
पर्सा 051-522151 9855090136 9855075555 985113182
राैतहट 055-520099 9855040999 9855035555 9851057575
वारा 053-550100 9855045101 9855005555 9851280137
मकवानपुर 057-520399 9855090150 9855045555
चितवन 056-520155 9855090133 9851280358 9855015555
काभ्रे 011-490202 9851280441 9851235555 9851091734
सिन्धुपाल्चोक 011-620104 9851280374 9851255555 9851023747
धादिङ्ग 010-520199 9851245555 9851280977
नुवाकोट 010-560199 9851282811 9851295555 9851280403
रसुवा 010-540199 9851282801 9851275555 9851280366
धनुषा 041-520099 9854026090 9854005555 9851280166
महोत्तरी 044-522151 9854030099 9854085555 9851033405
सर्लाही 046-520714 046-520099 9854075555 9851280133
सिन्धुली 047-520199 9854090133 9854065555 9851281199
रामेछाप 048-540099 9854040706 9848060989 9854055555
दोलखा 049-421199 9854015555 9851024584
कास्की 061-522099 9856039599 9856005555 9851280477
स्याङ्जा 063-420199 9856090162 9856075555 9851122133
गोरखा 064-420199 9856055555 9851280552
लम्जुङ्ग 066-520199 9856015555 9851128499
मनाङ् 066-440199 9856035555 9841832693
तनहुँ 065-560199 9856090178 9856065555 9841608863
रूपन्देहि 071-520199 9856090622 9857075555 9851280370
कपिलवस्तु 076-560099 9857090353 9857023470 9841326432
नवलपरासी 078-520199 9857065555 9857045403 9851042422
पाल्पा 075-520199 9857095555 9841696434
अर्घखाँची 077-420199 9857090352 9857005555 9851282000
गुल्मी 079-520199 9857061710 9857015555 9851280377
बाग्लुङ्ग 068-520199 9857620003 9857605555 9857090014
पर्वत 067-420199 9857630551 9857615555 9851093858
म्याग्दी 069-520299 9857640444 9857625555
मुस्ताङ्ग 069-440099 9857635555 9851076648
दाङ्ग 082-560199 9857890101 9857805555 9851012422
प्युठान 086-420049 9857815555 9851110752
रोल्पा 086-440199 9857825555
रूकुम 088-530187 9857835555 9851280111
सल्यान 088-520099 9857890077 9857845555 9849797490
बाँके 081-520211 9858090110 9858055555 9742003314
वर्दिया 084-420199 9858090101 9858035555 9841448195
सुर्खेत 083-520199 9858090190 9858005555 9851280123
दैलेख 089-420113 9858090122 9858015555
जाजरकोट 9858054050 9858054050
जुम्ला 087-520013 087-520263 9858325555 9742055566
कालिकोट 087-440083 9858390011 9858335555 9745035140
मुगु 019-460099 9858345555 9851061104
हुम्ला 019-680055 9638819953 9858315555 9851280555
डोल्पा 087-550056 9847815049 9858305555 9848205852
कैलाली 091-521150 9858425555 9851280141
डोटी 094-420205 9858440199 9858435555 9851280379
अछाम 097-620199 9858490126 9858405555 9851280800
बझाङ्ग 092-421005 9858415555 9851280433
बाजुरा 097-541130 9858490053 9858445555 9851147258
कन्चनपुर 099-521200 9858752200 9858735555 9851284000
डडेलधुरा 096-420199 9858790070 9858715555 9851280180
बैतडी 095-520199 9858705555 9858705555 9741193563
दार्चुला 093-420199 9858725555 9858790023
ललितपुर 5551055 9851283017
भत्तपुर 6614852 9851283020
काठमान्डाै 4261360 9851283012
Thank you so much for share....

Tuesday, September 29, 2015

१९५० को सन्धी उल्लंघन भयो, अब कोशी र कर्णाली के हुन्छ ?

नाकाबन्दीबाट अब दिल्ली झुक्छ या काठमाडौं !

Narendra modi in ktm (3)

अरुण बराल/ विश्लेषण
१२ असोज, काठमाडौं । सन् १९५० मा सम्पन्न नेपाल भारत शान्ति तथा मैत्री सन्धी भारतले एकतर्फीरुपमा उल्लंघन गरेको छ । भारतले शान्ति तथा मैत्री सन्धीको एकतर्फीरुपमा उल्लंघन गरेपछि अब नेपालमा सुघौली सन्धी, ग्रेटर नेपाल लगायतका विषयहरु ब्युँझन सक्छन् ।
भारतले नेपालसित गरेका कोशी सम्झौता, गण्डक सम्झौता, महाकाली सन्धी र पछिल्लो अपर कर्णालीको पीडीएमाथि नेपालीका तर्फबाट प्रश्न उठ्नु अस्वाभाविक हुँदैन ।
काठमाडौं तराई जोड्ने फास्ट ट्रयाक र सुरुङ मार्ग भारतीय कम्पनीलाई किन दिने भन्ने प्रश्न अब बलियो बन्ने अवस्था आएको छ । अन्तराष्ट्रिय विमानस्थलको स्तरोन्नतिको ठेक्का भारतलाई किन दिने ? यो प्रश्न पनि उठ्न सक्छ । नेपाललाई सताउने भारतको नियत देखिइसकेपछि निजगढ विमानस्थल निर्माण पनि अब चीन वा अन्य विश्वासिलो देशलाई दिने सोचाइ नेपालीहरुमा पलाउनु स्वाभाविक हुन्छ ।
भारतले नेपाललाई हेपेर अघोषित नाकाबन्दी लगाएपछि नेपालमा हुने जलविद्युत आयोजनामा उसले लगानी गर्ने वातावरणमा निकै गतिलो ठेस पुगेको छ । पछिल्लो परिघटनाले यो निश्चित देखिएको छ कि अब नेपाल या त भुटानजस्तो भारतको ‘संरक्षित राष्ट्र’ भन्ने छ, या त भारतविरोधी स्वतन्त्र एवं सार्वभौम राष्ट्र रहनेछ ।
कमसेकम मधेसलाई श्रीलंकाको जाफ्ना टापुजस्तो बनाएर गृहयुद्धमा फसाउन खोजियो भने भारतमा त्यसको असर जम्मु कश्मिरदेखि दार्जीलिङ, सिक्किम र असामसम्मै पुग्नेछ । याे अवस्था रहिरहे भारतकै राजनीतिमा पनि कांग्रेस र कम्युनिष्टले मोदी सरकारविरुद्ध जेहाद छेड्नेछन् ।
यसरी उल्लंघन भयो १९५० को सन्धी
नेपालले सन् १९५० को सन्धी खारेज वा परिमार्जन गरिनुपर्ने बताउँदै आएको छ । तर, भारतले अहिलेसम्म मानेको छैन । सो सन्धीका कतिपय प्रावधान नेपालमाथि हस्तक्षेप लाद्ने खालका  छन् । तर, अहिले आएर भारतले १९५० को सन्धीभित्रका नेपाललाई सकारात्मक देखिएका धाराहरुको पनि उल्लंघ गरेको छ ।
Treaty of 1950
नेपाल-भारत शान्ति तथा मैत्री सन्धीको धारा ५ मा नेपालले भारतको भूमि भएर सैन्य सामाग्रीसमेत आयात गर्न पाउने उल्लेख गरिएको छ । तर, भारतले हतियार त के, अत्यावश्यक इन्धनसमेत नेपालमा भित्र्याउन दिएको छैन । यो १९५० को सन्धीको ठाडो उल्लंघन एवं बर्खिलाप हो । यो नाकाबन्दी भारतले छिमेकी देशमाथि गरेको हमलाकै स्तरको अपराध र आक्रमण हो ।
भारतीय पूर्वराजदूत राकेश सुदले आफ्नो लेखमा मधेसी भूमिमा पहाडीहरु कति प्रतिशत झरे भनेर विश्लेषण गर्छन् । यस्तो तर्क गर्ने हो भने भारतीय सेनाको गोर्खा रेजिमेन्टमा कति नेपालीहरु कार्यरत छन् भन्ने पनि हिसाब गर्नुपर्ने हुन सक्छ । दार्जीलिङ भारतको हुनुपर्ने बैधता कहाँ छ भन्ने पनि  प्रश्न उठ्न सक्छ । बहुमत नेपालीले बनाएको संविधानलाई भारतले स्वागत नगर्ने हो भने बहुमतका आडमा सिक्किमलाई भारतमा मिलाइएकोमा नेपालले पनि उसलाई समर्थन जनाउँदैन भन्ने प्रश्न पनि उठ्न सक्छ नेपालमा ।
भारतकाे असाम राज्यमा अहिले भइरहेको नागरिकतासम्बन्धी विवादमा नेपाली मूलका नागरिकमािथ भएको विभेदका विषयमा नेपालले बोल्ने स्थिति अाउन सक्छ । अर्काको आन्तरिक मामिलामा बोल्दै जाने हो भने नेपालले पनि उठाउनुपर्ने यस्ता विषयहरु धेरै हुन सक्छन् ।
भारतको कोलकातादेखि दिल्लीसम्म, अनि होटलदेखि कोइलाखानीको सुरुङसम्म भारतीयहरुले कति नेपालीलाई सस्तो श्रममा लगाएर दासलाई जस्तो व्यवहार गरेका छन् ? ती मजदुरहरु र घरेलु कामदारको हकबारे अन्तरराष्ट्रिय फोरमहरुमा समेत कुरा उठाउन सक्ने गरी प्रवासी नेपालीका संगठनको सञ्जाल भारतमा पनि नभएको होइन ।
नेपालीहरुले भारतका कम्युनिष्ट पार्टी, त्यहाँको माओवादी र कांगेस आईसम्मलाई लविङ गर्न र भारतीय राजनीतिमा माइक्रो म्यानेजमेन्ट गर्न सक्छ । मोदीको विपक्षमा रहेका ममता ब्यानर्जीदेखि नितीशकुमार सम्मलाई सहयोग मागेर सीमानामा बन्द व्यापार सहज गराउने प्रयत्न पनि गर्न सक्छ ।
यसरी सन् १९५० को सन्धीको भारतले एकतर्फी उल्लंघन गर्ने हो भने नेपालले मात्रै मान्नुपर्ने बाध्यता हुँदैन । तेलचाँहि नदिने तर कुहिएको तरकारी नेपालमा बेच्न ल्याउने हो भने नेपालीहरुले त्यसमा रोक लगाउन सक्छन् । ठूलो हुनुको दादापन देखाएर अन्तरराष्ट्रिय कानूनको ठाडो उल्लंघन गर्ने हो भने नेपालीहरु पनि कमजोर होइनन् । दक्षिण एशियामा भारत अंग्रेजहरुको उपनिवेश हुँदा नेपालले अंग्रेजसँग लडेर देखाएकै हो ।
त्यसैले सर्वप्रथम भारतले १९५० को सन्धी अनुसार नेपाललाई निर्वाधरुपमा उसको भूमिबाट तेल आयात गर्न दिनैपर्छ, त्यसमा रोक लगाइनु सन्धीको गम्भीर उल्लंघन हो । यो भारतले गरेको अन्तरराष्ट्रिय अपराध नै हो ।
अब दिल्ली झुक्छ कि काठमाडौं ?
भारतले नाकाबन्दी गरेपछि अब यो नेपालको राष्ट्रिय स्वाभिमानको विषयसँग गाँसिइसकेको छ । नेपालको मामिलामा भारतका केही सरोकारहरु छन् भने अब ती यही नाकाबन्दीको वीचबाट पूरा गरिनु भनेको नेपाल हार्नु हो ।
अब नेपालले  दिल्लीसँग शीर झुकाउनु भनेको नेपालाई भारतको ‘संरक्षित राज्य’का रुपमा गिराउनु हो । यस्ताे बेलामा भारतका माग पूरा गर्ने र मात्रै नाकाबन्दी खोल्ने भन्ने शर्तनामा नेपालको राष्ट्रिय स्वाभिमानका लागि युगान्तकारी भुल हुनेछ ।
एमाले अध्यक्ष केपी ओलीले यसैसाता आयोजना गरेको सम्पादकसँगको छलफलमा भनेका थिए, ‘छिमेकी देशका जायज सरोकारहरुलाई हामी पूरा गर्न तयार छौं ।’ तर, भारतको अहिलेको पहिलो माग वा सरोकार भनेको केपी ओलीलाई कुनै पनि हालतमा प्रधानमन्त्री बन्न नदिने हो । यो कुरा भारतीय गुप्तचर माहुरले काठमाडौं आउँदा एमाओवादी र कांग्रेसका नेताहरुसँगकाे कुराकानीमा खोलिसकेका छन् ।
यो कुरा निश्चित छ कि भारतको तात्कालीन सरोकार केपी ओलीलाई प्रधानमन्त्री हुनबाट रोक्नु नै हो र आफूले चाहेको चम्चालाई प्रधानमन्त्री बनाउनु अनि मात्र नाकाबन्दी खोल्नु हो । विगतमा भारतले भुटानमा विपक्षी दललाई सरकारमा पुर्‍याउन यही रणनीति अख्तियार गरेको थियो, जुन अहिले नेपालमा प्रयोग गरिँदैछ, नाकाबन्दीको माध्यमबाट ।
भारतको यो योजना ‘क्रस’ गर्ने केपी ओलीसँग तीन विकल्प छन् : एक-आफू प्रधानमन्त्री नभई उसैको अनुकूलको प्रधानमन्त्री बन्न दिने, दुई- भारतसँग झुक्ने र उसका असंगत मागहरुमा समर्पण गर्दै निहुरिएर प्रधानमन्त्री बन्ने । तेस्रो- भारतले जेसुकै भन्दै गरोस्, १५ गतेदेखि सुरु हुने संसद बैठकबाट तीन दलले एकतावद्ध भई आफैं आफ्नो देशको प्रधानमन्त्री छनोट गर्ने ।
यिनै तीनवटा विकल्प छन् भारतको माइक्रो म्यानेजमेन्टलाई क्रस गर्ने । र, भारतले भनेको व्यक्तिलाई राष्ट्रपति वा उपराष्ट्रपति नबनाउने, आफ्नो देशको राष्ट्रपति र उपराष्ट्रपति आफैं छान्ने ।
तर, भारतलाई ‘क्रस’ गरेर केपी ओली वा अरु कोही प्रधानमन्त्री भए पनि फेरि पनि उसको दबाव र नाकाबन्दी कायमै रहन सक्छ, जुन चुनौतीको सामना नयाँ प्रधानमन्त्रीले गर्नैपर्ने हुन्छ । त्यस्तो बेलामा के गर्ने ?
नाकाबन्दीले सिकाएको पाठ
भारतले गरेको अघोषित नाकाबन्दीले नेपालीहरुलाई गतिलो पाठ सिकाइदिएको छ । प्रथमतः हामी नेपालीहरुले भारतीय कथित ‘ऋषि मन’भित्र रहेको ‘राक्षसी मन’ राम्रोसँग चिन्ने मौका पायौं । दोस्रो– राष्ट्र बैंकका गभर्नरले भनेजस्तै हामी नेपालीहरु कतिसम्म परनिर्भर भइसकेका रहेछौं भन्ने अनभूति गर्ने अवसर पायौं ।
तेस्रो– भारतभित्रै पनि नेपालसँग शत्रुता मोल्नुहुँदैन र नाकाबन्दी गर्नुहुँदैन भनेर सदिच्छा राख्ने जनमत रहेछ भन्ने हामीले चिन्न पायौं ।  चौथो- राष्ट्रियताको मामिलामा हामीले मधेसको संवेदनशीलतालाई पर्गेल्ने मौका पायौं । र, पाँचौं- छिमेकीले अन्तरतष्ट्रिय कानूनको उल्लंघन गर्दा अन्तरराष्ट्रिय लविङ गर्न र उसँग दह्रो गरी आवाज उठाउन नसक्ने हाम्रो राज्य-मेसिनरी कति कमजोर रहेछ भनेर जाँच्ने मौका पनि हामीले पायौं ।
यी सबै पाठहरु सिकिसकेपछि अब नेपालले आफूलाई स्वतन्त्र र स्वाभिमानी राख्न के-के गर्नुपर्ने रहेछ भन्ने स्वतः स्पष्ट हुन्छ । यो विषयलाई अब नेपालीले राष्ट्रिय बहसको विषय बनाउन जरुरी देखिएकाे छ ।
नेपालको हात के-केमा माथि छ ?
नेपालको माामिलामा भारतको मात्रै हात माथि छैन, नेपालको हात पनि माथि छ भन्ने हामीले बुझ्नुपर्छ ।
प्रथमतः मोदीले नेपालको संसदमै भनेका थिए कि बुद्ध जन्मेको देशमा विचारको पनि अभाव छैन, इच्छाशक्तिको पनि कमी छैन । हिमालयको जडीबुटी र यहाँको जलसम्पदा भारतलाई किन्न दिनोस् भनेर मोदीले नेपालको संसदमा रोइकराई गरेको भिडियो अहिले पनि युट्युबमा सुन्न पाइन्छ ।
मोदीले नै बताइसकेका छन् कि नेपालको जलस्रोत भारतका लागि लाइफ लाइन हो । जसरी हाम्रा लागि पेट्रोल अपरिहार्य छ, त्यसैगरी भारतलाई विद्युतीय उर्जाको ठूलो अनिकाल छ । अहिले नेपाललाई चिढ्याएर भारतले यहाँका जलविद्युत आयोजनाबाट हात धुने स्थिति आयो भने भारत निकै ठूलो संकटमा फस्नेछ । यसका लागि पनि भारतले नेपाललाई मित्र बनाइराख्नु उसको बाध्यता हो ।
दोस्रो, विकास र व्यापारमा मात्रै होइन, भारतको विकास, स्थायित्व र सुरक्षाको मामिलामा पनि नेपाल सम्वेदनशील ठाउँ हो । नेपालको सम्बन्ध चीनसँगमात्रै होइन पाकिस्तानसँग पनि सुमधुर छ । पूर्वी सीमानामा जोडिएको दार्जीलिङ, सिक्किमदेखि असामसम्मै नेपालीको पहुँच छ । नेपालमा हुने अशान्तिले भारतलाई डिस्टर्ब गरिरहन सक्छ । अझ मधेसमा हुने गरीवी, अशान्ति र हिंसाले भारतको व्यापार व्यवसायमा ठूलो अवरोध पुर्‍याउन सक्छ । यो भारतको दोस्रो बाध्यता हो कि उसले नेपालाई अशान्त हैन, शान्त र समुन्नत राख्न योगदान गर्नैपर्छ ।
तेस्रो, भारतले नेपाललाई जति गिजोल्छ, त्यति नै कश्मिरदेखि सिक्किमसम्म यसले असर पार्न सक्छ । भुटानलाई पनि यसले प्रभाव पार्न सक्छ । नेपालीहरुले गर्ने भारतीय हस्तक्षेपको विरोधले कश्मिरको स्वतन्त्रता आन्दोलनलाई उर्जा दिन्छ भने सुतेको सिक्किममा पनि दिल्ली विरोधी जनमत विस्तारै जन्मन सक्छ । भुटानमा अहिले भारतको हेपाहा प्रवृतिको विरोधमा ठूलो जनमत बन्न थालिसकेको छ । यसर्थ भारतले नेपालसँग गर्ने शत्रुताले अन्य छिमेकी देशमा पनि यसको प्रभाव बढ्नेछ । श्रीलंका र बंगलादेशमा पनि भारतविरोधी जनमत बढाउने छ, नेपालको घटनाले ।
चौथो-भारतले जति-जति नेपाललाई नाकाबन्दी गरेर दुख दिँदै जान्छ, उति उति नेपालको नयाँ पुस्तासमेत ‘एण्टी इण्डियन’ बन्न थाल्छ । अहिले स-साना बालवालिकामा समेत भारतविरोधी मानसिकता जन्मिइसकेको छ । भारतप्रति खासै धारणा नबनाएको नेपालीहरुको नयाँ पुस्ता यतिबेला भारतविरोधी बन्न थालिसकेको छ । यसको प्रभाव दीर्घकालीनरुपमा भारतमाथि पर्न जाने छ । जसको प्रभावस्वरुप भारतीय व्यापारीहरुले नेपालमा सटर बन्द गरेर राजस्थानतिर जानुपर्ने स्थिति आउन सक्छ ।
दिल्लीमा सस्तो श्रम बेच्ने नेपालीहरु त्यहाँबाट खेदिए भने उनीहरुले स्वदेशमा आएर गाई बाख्रा पाल्ने छन् र नेपाललाई समुन्नत बनाउनेछन् । यहाँ अर्को पनि तथ्य छ कि नेपालीका लागि अब विगतमा जस्तो भारतको कोइलाखानी मात्रै गन्तव्य होइन । नेपालीहरु दिल्लीको साटो अरबतिर गएर बढी कमाइरहेका छन् । सन् १९५० यता सप्तकाेशीमा धेरै पानी बगिसकेकाे छ ।
पानीमा दबाव
भारतले हामीलाई रुवाउन र दबाव दिएर झुकाउनै खोजेको हो भने उसलाई नेपालको जलस्रोतमा सहज हैन, असहज परिस्थिति सिर्जना किन नगर्ने ? संसारकै सस्तो मानिएको कर्णालीको पीडीए खारेज गरेर हामी नेपालीले आफैं किन नबनाउने ? राजधानी र तराई जोड्ने फास्ट ट्रयाक उसलाई दिनुको साटो नेपालीले आफैं किन नबनाउने ? नेपालको पानीमा सके विजुली निकालौंला, नसके लोडसेडिङमै बसौंला तर, भारतको नाकाबन्दीसँगै झुकेर उसले भनेको किन मान्ने ? बलभद्र कुँवर त नाकाबन्दीमा बसेनन् हामी किन बस्ने ? भक्ति थापा त झुकेनन् हामी किन झुक्ने ? यस्ता प्रश्नहरु नेपालीका दिल दिमागमा आउन थालिसकेका छन्, भारतीय नाकाबन्दीका कारणले ।
अन्त्यमा, मधेसबारे
दिल्ली भर्सेज काठमाडौंको कुरो गरिरहँदा मधेसबारे मौन रहन सकिँदैन । मधेसका जनता काठमाडौंसँग रिसाएका छन्, यो बेग्लै समस्या हो । तर, अहिले भारतले जुन नाकाबन्दी गरिरहेको छ, यो राष्ट्रियता एवं दुई देशवीचको सम्बन्ध र हाम्रो राष्ट्रिय स्वाभिमानसँग गाँसिएको विषय हो । यी दुई समस्यालाई फरक गरेर हेर्नुपर्छ ।
काठमाडौंमा रहेका भारतीय कर्मचारीले नाकाबन्दी गरेको छैन भन्दैछन्, उनीहरुले आफ्नै देशका सीताराम येचुरी र सांसद अयरको भनाइ सुने हुन्छ । नेपालमा नाकाबन्दी नगर भनेर भारतमा आवाज उठिरहेको छ । नाकाबन्दी नगरेको भए उनीहरुले कसरी नाकाबन्दीको कुरो गर्छन्  ? त्यसैले कीर्ते तर्क गरेर नेपालीलाई ढाँट्ने काम गर्नुको साटो नाकाबन्दी तत्काल खोल्नेतिर लाग्यो भने नेपालमा भारतविरोधी भावना बढ्दैन भने भारतीय दूताबासका कर्मचारीले बुझ्न जरुरी देखिन्छ ।
सीमानामा अवरोध नै नभएको काँकडभिट्टा नाकाबाट किन एसएसबीले तेलका ट्यांकर फर्काइरहेको छ ? भारतीय दूताबासले जवाफ देओस् ।
मधेसले उठाएको मुद्दा नेपालको आन्तरिक मामिला हो । मधेका  नेपाली जनतामा पनि राष्ट्रिय भावना छ । केही पृथकतावादीले प्रहरीबाट दमन भयो भन्दै अलग देशको कुरा गर्छन् र भारतको गुलामी गर्दै आफ्नो देशको अपमान गर्छन्, तिनलाई उचालेर भारतको हित हुनेवाला छैन ।
त्यसाे त पाकिस्तानले कश्मिरको स्वतन्त्रताका लागि संयुक्त राष्ट्र संघमा रिजोलुसनको कुरो उठाइरहेको छ । यस्ताे बेलामा मधेसलाई तामिल बनाउन खोजेर भारतले आफैं दुःख पाउनेछ । भारतले नठाने हुन्छ, सगरमाथाको फेदमा युगौंदेखि स्वतन्त्र रहेको यो देश भारतसँग हार्छ । दिल्लीसँग झुक्छ ।
अहिले केही नेताहरू भारतीय नाकाबन्दीसँग झुके भने पनि भारतले नेपालबाट अाफ्नो प्रभाव गुमाइसकेको हुने छ । दौरा लगाएका भारतीय एजेन्टहरुको निद्रा हरण भइसकेको छ । अब भावी सरकारमा जो चर्को भारतविरोध छ, उही आउने सम्भावना बढेको छ, भारतविरोधी जनमतले । यो भारतका लागि दुखको कुरा हो ।
तत्काल तेल नपाएर छटपटिँदा काठमाडौं झुक्ला, तर अन्ततः भारतको हेपाइका सामु सगरमाथा झुक्दैन । अहिलेसम्म झुकेको पनि छैन । बुद्धको देशमा विचार र स्वाभिमानको खाँचो छैन । मोदीले नै स्वीकारेका छन्, गोरखालीहरुमा वीरताको पनि खाँचो छैन । सगरमाथाको फेदबाट बगेको पानी भुटान वा सिक्किमको भन्दा फरक छ ।

Thursday, September 17, 2015

How to execute a real-time kinematic (RTK) survey from start to finish- Trimble 4700/5700/R7

About real-time kinematic surveying

Real-time kinematic (RTK) surveys provide centimeter-level precision coordinates without post-processing. RTK surveys are generally used for mapping or for surveying points where only several cm of precision are needed, such as 1) mapping out a feature such as a falt scarp or a shoreline; 2) recording the locations of sample sites; or 3) measuring the positions of markers such as stakes on a glacier to determince ice velocities. Occupation times for survey points are on the order of seconds. Because the measurements are real-time, not requiring post-processing of the data, RTK is also a strong navigational tool, allowing the user to navigate to within 1.5 cm of a target, e.g. an unmarked sample site such as a plant that the researcher would like to revisit. RTK requires use of radios to communicate corrections in real-time. This adds a level of complexity to the survey and is often not recommended unless the real-time capabilities are specifically needed. Otherwise, consider executing a post-processing kinematic survey instead.
RTK surveys require operation of at least two receivers: a ‘base’ receiver, sending correctional information, and one or more ‘rover’ receivers receiving correctional information and surveying or navigating to points. You may use as many rover receivers as you wish. If you have access to real-time data transmissions from a reference station already operating in your area (within several km and approximate line-of-site of your survey), there may be no need to set up an additional base station.
There are three types of survey methods in RTK surveys: topo points, continuous surveys, and stakeouts. Topo points are short (usually 3-15 second) occupations, e.g. over a sample site or survey marker. Continuous survey mode allows ongoing data collection at a specified logging interval, e.g. every 5 seconds, or a specified distance interval, e.g. 1 meter. Continuous mode is used for mapping. Stakeout mode allows navigation to predetermined coordinates.

Planning the Survey

Geography. The base station should be located within several (approximately 5) km of and in approximate line of site of the area to be surveyed. Radio links and corrections may not work over longer distances or in situations of poor visibility between the base radio and the rover radio(s). Consider locating your base in an open area from which you can see your entire survey area. Repeater radios can be used to relay the base corrections to the rover(s) in variable terrain. If you think you may lose line-of-sight communication between the base and the rover(s), conduct an 'rtk and infill' survey (described below).
Base. The base GPS antenna can be set up over an existing mark or a newly established mark, or, if no repeat surveying will be needed, placed directly on the ground. Correspondingly, the antenna mount used (if any) will depend on project needs. For a repeatable survey, you will need a way to center and level the antenna over your mark. If you are setting up over a known mark (preferred), it is best to know the coordinates of the mark beforehand. You will have to give the base station its coordinates in WGS-84 latitude, longitude, and height when you start the survey. If you do not know the coordinates of the base station but can obtain them (e.g. by collecting data during your survey and processing the data for a point position later), you can adjust the survey accordingly in the lab after data collection. If you will be collecting data at the base station to obtain a base position, plan to collect at least an hour's worth of data. See the UNAVCO Knowledgebase for more information on mounts (http://facility.unavco.org/kb/questions/394/).
Coordinate system. Unlike for post-processing kinematic surveys, you are recommended to choose a projection and datum. If you are referencing a previous survey, you MUST use the same projection and datum that was used before. Record the projection and datum used for future surveys. If you are starting from scratch, consider using the universal transverse mercator (UTM) coordinate system; determine your zone by checking e.g. http://www.dmap.co.uk/utmworld.htm.
Data logging. Data are stored in the survey controller as coordinates; no raw data are stored unless specified. If you want to process the data after the survey, you must collect data at both the base receiver and at the rover(s). If this is the case, choose a logging interval before starting the survey. The base receiver must have a logging interval at least as high as the rover receiver's; data from the rover can only be processed if corresponding data are collected at the base. The logging interval will depend on the survey goals. If mapping, think about how often you need a data point. For example, if doing a detailed survey or surveying from a vehicle, a 1 Hz (1 second) logging interval may be appropriate. For less detailed work and/or if walking, a 5 second logging interval may be appropriate.
Things to know before and during the survey:
Base GPS antenna type: _____________ (usually Zephyr Geodetic)
Rover GPS antenna type: _____________ (usually Zephyr or Zephyr Geodetic)
Base GPS antenna height measurement method: _____________ (usually "Bottom (or Top) of notch" or "Bottom of antenna mount")
Rover GPS antenna height measurement method: _____________ (usally "Bottom of antenna mount")
Base station coordinates: _____________ N/S latitude, _____________ E/W longitude, _____________ height (meters)

The survey controller

A survey controller is needed for running the rover receiver. The survey controller gives control over the survey and records metadata that facilitates data organization. Note that the TSC1 survey controller will not work with the R7 receiver.
The menu system is very similar for the Trimble TSC1, TSCe, and TSC2. There may be some slight variations in wording from what is shown here, depending on which controller you are using, but the general flow should be the same.
Navigation is also similar between controllers, although the TSC1 has no stylis or touch-screen and the TSCe and TSC2 do. Drop-down menus are indicated by a right-pointing arrow inside a circle. To see a drop-down menu in the TSC1, highlight the menu item and push the right arrow on the controller; in the TSCe and TSC2, touch the arrow. To go back a screen, press the "Esc" key (TSC1) or option (TSCe, TSC2). To get to the main menu, press the "Menu" key or option.
Each survey controller is powered by a removable battery; however, when plugged into a receiver the controller will run off the receiver's power.

Preparation

Survey Controller

To save time in the field, configure your survey in the survey controller beforehand.

Create a Job

  1. Turn on the survey controller by pushing the green power button.
  2. If needed, enter the "Survey Controller" program by double-clicking the corresponding icon.
  3. The main menu consists of 6 options on the screen. Select "Files" in the top left.
  4. In the TSC1, select "Job management", then "New" (F1 key). In the TSCe, select "New Job".
  5. Give the job a name using the letter and number keys and hit "Enter". In the TSC1, select a memory location for the job; suggested setting is Main memory. Hit OK (F1).
  6. Select "Coordinate system" (in the TSCe and TSC2, double-click on it or highlight it and press the enter (arrow) key):
    • TSC1 only: If the job file for the previous survey is in your survey controller, select "Copy from other job". Select the job from the list.
    • If you are starting from scratch, we recommend you select "Select from library". Recommended settings are System: UTM, Zone: [determine your zone by checking e.g.http://www.apsalin.com/utm-zone-finder.aspx], Datum: WGS 1984, Use geoid model: No, Use datum grid: No, Project height: [approximate average survey elevation], Coordinates: Grid.
    • For a custom coordinate system for your survey, select "Key in parameters".

Set the Survey Style

  1. From the main menu, select "Configuration" in the top right.
  2. Select "Survey Styles"-->"RTK" (or "RTK & infill" to collect raw data, options denoted by * asterisks *)-->"Rover options".
    • Survey type: RTK or RTK & infill
    • * Logging device: [Choose Controller or Receiver; suggested setting is Controller] *
    • * Auto file names: [Choose Yes or No; suggested setting is Yes] *
    • * Logging interval: [Choose logging interval; depends on survey goals] *
    • Broadcast format: [MUST be the same as the Broadcast format in Base options; suggested setting is CMR+; this refers to the format in which the RTK corrections are sent from the base]
    • WAAS: Off
    • INS position: RTK only (TSC1)
    • Use station index: [Must match Station index in Base options; suggested setting is Any if there are no other broadcasting RTK base stations in the vicinity (available only in some controllers--otherwise enter 29]
    • Prompt for station index: Yes
    • Satellite differential: Off (TSCe)
    • Elevation mask: [Enter elevation mask; suggested setting is 13 00'00"; this is the elevation angle from the horizon below which no data will be collected from satellites]
    • PDOP mask: [Enter PDOP mask; default setting is 6.0 but should be set higher in difficult surveying conditions (limited sky view); this is a quantitative expression of satellite geometry, with lower numbers representing more favorable geometries]
    • Antenna height: [Enter antenna height if known--can be modified in the processing or in the field]
    • Type: [Select antenna type from list]
    • Meas. to: [Select antenna height measurement method]
    • Serial number: [Enter antenna serial number, if known]
    Hit Enter or Accept when done to get back to the RTK menu.
  3. Select "Rover radio".
    • Type: [Select rover radio type from list. If using UNAVCO OPP equipment, select "Pacific Crest". If using UNAVCO EAR equipment, select "Trimble internal". If you select "Trimble internal," you are done with this page on a TSC1; select "Trimble 450/900" for "Method" on the TSCe.]
    • Route through controller: Leave blank (TSCe)
    • Controller port: [Select the port on the controller that you will be using to connect the controller to the rover receiver]
    • Receiver port: [Select the port on the receiver that you will be using to connect the rover receiver to the radio, usually port 3]
    Hit Enter or Accept when done to get back to the RTK menu.
  4. Select "Base options".
    • Survey type: RTK or RTK & infill
    • * Logging device: [Receiver] *
    • * Auto file names: [Yes] *
    • * Logging interval: [Select logging interal; must be at least as frequent as rover, e.g. 5 seconds] *
    • Broadcast format: [MUST be the same as the Broadcast format in Rover options; suggested setting is CMR+; this refers to the format in which the RTK corrections are sent from the base]
    • Output additional code RTCM: [No/blank]
    • Station index: [Must match Use station index in Rover options; suggested setting is 29]
    • Elevation mask: [Enter elevation mask; suggested setting is 13 00'00"]
    • Antenna height: [Enter antenna height--can be modified in the processing if necessary]
    • Type: [Select antenna type from list]
    • Meas. to: [Select antenna height measurement method]
    • Serial number: [Enter antenna serial number, if known]
    Hit Enter or Accept when done to get back to the RTK menu.
  5. Select "Base radio".
    • Type: [Select base radio type from list. If using UNAVCO OPP equipment, select "Pacific Crest". If using UNAVCO EAR equipment, select "TRIMMARK 3"]
    • Controller port: [Select the port on the controller that you will be using to connect the controller to the base receiver, usually COM1]
    • Receiver port: [Select the port on the receiver that you will be using to connect the rover receiver to the radio, usually Port 3]
    Hit Enter or Accept when done to get back to the RTK menu.
  6. Select "Topo point"
    • Auto point step size: [Enter auto point step size; suggested setting is 1; this automatically names points measured with the last character being a number 1 higher than that of the previous point measured]
    • Quality control: [Select quality control option; suggested setting is QC1&QC2]
    • Auto store point: [Select Yes or No; suggested setting is Yes; this automatically stores a point after the minimum conditions specified below are met]
    • Occupation time: [Enter minimum occupation time; suggested setting is 0m 5s; this specifies how long you would like to occupy a survey point]
    • Number of measurements: [Enter minimum number of measurements; suggested setting is 3; this specifies how many measurements you would like to collect before the controller stores your survey point]
    • Horizontal precision: [Enter minimum horizontal precision needed to store a measurement; suggested setting is 0.015m]
    • Vertical precision: [Enter minimum horizontal precision needed to store a measurement; suggested setting is 0.020m]
    Hit Enter or Accept when done to get back to the RTK menu.
  7. Press the Menu key to get back to the main menu. You are done configuring your survey.

Equipment

  • If you are using a 5700 or R7 receiver, make sure there is a compact flash card in the receiver and enough memory for your survey (base station).
  • Make sure there is enough memory on your survey controller for your survey. If using a TSC1, make sure there is a compact flash or PCMCIA card in the controller.
  • Charge batteries. If using internal batteries, charge them in the receiver by plugging the receiver into an AC outlet using the AC power cable.
  
UNAVCO NSF EAR RTK base GPS unit: typical packing (left) and view of all components (right).
  
UNAVCO NSF EAR RTK base radio unit: typical packing (left) and view of all components (right).
  
UNAVCO NSF EAR RTK rover GPS unit: typical packing (left) and view of all components (right).

In the Field

Setting up and starting the base station

Base station setup may vary depending on the project goals. The suggested setup includes a high-precision (stable, centered, and level) and repeatable antenna setup. Antenna setup instructions will depend on the mount used. (See Base, under Planning the Survey, above.) The base station should have good sky view; it must track at least 5 satellites in common with the rover at all times.
The base must be operating at all times when the rover is running in order to attain corrected positions; set up the base station before starting the rover.
  1. Set up the GPS antenna:
    • Level antenna mount where needed. Make sure the mount is centered over the mark.
    • Attach antenna to mount.
    • Align the antenna to true north where needed.
    • Measure and record the antenna height and the antenna height measurement method.
  2. Attach the antenna cable to the antenna, if you haven't already. Use the 90 degree connector for the antenna; pass the straight connector through the pass-through in the equipment case. DO NOT kink the cables; they are expensive, important, and subject to damage.
  3. Connect the radio antenna to an antenna mount. The radio antenna should be aligned vertically.
  4. Connect the radio antenna cable to the base radio.
  5. Connect the base radio to an external battery. Make sure the radio antenna is connected to the radio BEFORE you connect the radio to power; the radio will power up automatically.
  6. Connect the base radio to port 3 of the base receiver using the radio cable.
  7. Connect the receiver to a battery (DIFFERENT from the radio battery) using the battery cable and/or to an AC outlet using the AC power cable and port 2 of the receiver. To connect the cable, align the red dot on the connector with the red dot on the receiver and push straight in. NEVER TWIST the connector, as the pins inside may break. The receiver will power up automatically if attached to external power.
  8. Connect the survey controller to port 1 of the receiver as described in (3), above.
    • Turn on the survey controller by pushing the green power key. Power up the receiver by pushing the green power button if it is not already on. Double-click on the Survey Controller icon (TSCe, TSC2). The survey controller should recognize the GPS receiver; a receiver icon will appear on the screen, along with a GPS antenna with antenna height (the height will likely be wrong or show as a question mark) and a satellite icon with the number of satellites the receiver is tracking.
    • Select Survey in the lower left.
    • Select your chosen survey style (e.g. RTK).
    • Select "Start base reciever".
    • For "Point name," select "Key In Points". In the Options menu, under Coordinate View, select WGS84, hit Accept. Enter your base station coordinates in latitude, longitude, and height and select Store. If you do not know your site coordinates, select "Here". A rough coordinate estimate will be obtained and used for the survey. Give your site a name. Select Store. *If you are selecting "Here" and want your data to be accurately referenced to a coordinate system after the survey, you MUST collect data at your base receiver.*
    • Enter the GPS antenna height and measurement method. Station index: 29, Transmit Delay: 0. Select Enter and Accept, or Start.
    • You should see "Base Started: Disconnect Collector". Remove the survey controller cable from the base receiver, then hit "Okay".
  9. Check the base radio. If you are using a TRIMMARK 3 base radio, move through the menus using the "Next" key OR use the survey controller while connected to the base receiver (from the main menu, go to Configuration-->Survey Styles-->RTK-->Base Radio-->Connect (lower left of screen). Suggested settings are: Mode - Base w/No Rpt (unless you are using a repeater), Transmit Power - Med Power 10W (dependent on geography), Channel Sharing - Off, Wireless Mode - TM3 19200 bps, Port 1 Cfg - 38400-8-None-1, Device Status - Call Sign OFF, Channel 3 461.1000Mhz. Check that the word "TRANS" is flashing in the upper right-hand corner of the Channel screen.
  10. Make sure the GPS receiver is fit to withstand any environmental dangers. Close the box, careful not to pinch any cables inside. Plug the pass-through with e.g. foam if heavy rains are expected.
  11. Set up the rover close to the base if at all possible to test the system before leaving to survey. RTK surveys can be finicky and it is best to troubleshoot as needed while the base is still accessible.
  
Connecting and disconnecting lemo connectors to and from the GPS receiver.
  
Base radio setup.
  
Base receiver and overall base station setup.

Setting up and running the rover

As with the base station, rover antenna setup may vary depending on the project goals. The suggested setup includes an antenna mounted on either a backpack mount (lower precision) or a range pole (higher precision).
  1. Connect the GPS antenna to the antenna mount.
  2. Connect the 90 degree end of the antenna cable to the antenna; uncoil just enough cable to reach from the antenna to the survey backpack with a small amount of slack. Place the rest of the cable, still coiled, inside the backpack. This will help to keep the cable tidy and unkinked. [If using a Trimble survey backpack, uncoil the appropriate amount of cable first and place the still-coiled cable in the backpack; pass the uncoiled end of the cable through one of the openings in the back of the backpack and connect the end to the antenna.]
  3. If using internal batteries, put the internal batteries in the receiver and place the receiver in the backpack with the ports facing upwards. If using an external battery, put the battery in the survey backpack with the terminals protected and place the reciever on top of or beside it with the ports facing upwards. Connect the battery to the receiver using the battery cable and port 2 or 3 of the receiver.
  4. Connect the straight end of the GPS antenna cable to the GPS antenna port on the receiver.
  5. If using a receiver with an internal radio, connect the radio antenna to the radio antenna port on the receiver. If using an external radio, connect the radio antenna to the survey backpack and to the rover radio; connect the rover radio to port 3 of the GPS receiver.
  6. Connect the survey controller cable to port 1 on the receiver using the survey controller cable. If using a Trimble survey backpack, pass the cable through one of the openings in the back of the backpack.
  7. Turn on the survey controller and the receiver if they are not on already. As with the base, you should see receiver, antenna, and satellite icons on the controller's screen. You should also see a radio icon. If you do not see the radio icon, there is probably a problem with your radio link. Proceed to the next step anyway, and then troubleshoot as needed.
  8. Connect to the rover radio:
    1. From the main menu, select Configuration-->Survey Styles-->RTK-->Rover Radio-->Connect
    2. Confirm that Base Radio Mode matches the Wireless Mode on the TRIMMARK 3, e.g. TRIMMARK 3 at 19200 bps. Confirm that Base Radio Frequency matches the Channel Frequency on the TRIMMARK 3, e.g. 461.1000 MHz. Return to the main menu.
  9. Select Survey in the lower left. Select your chosen survey style (e.g. RTK). Select "Start survey".
  10. Highlight the appropriate base station (usually 29) and hit "Accept". If you do not get a base station option and the following screen does not appear, proceed to Troubleshooting, below.
  11. A "Starting survey" screen with a progress bar should appear. A radio icon should appear in the upper right with the receiver and satellite icons. At the bottom of the screen, the controller will display survey messages and measurement precision. Possible messages are e.g. "No radio link," "Searching for satellites," "Poor PDOP," and "Initializing, please wait". Precision is displayed as "RTK: [Float/Fixed] H: xx V:xx" where the H and V values represent repeatability in the horizontal and vertical, respectively. 'Float' indicates the position is low precision; the base and rover receivers do not have enough satellites in common for long enough to confidently determine relative positions. 'Float' values are generally on the order of meters. 'Fixed' indicates enough data has been tracked to calculate high-confidence positions; 'Fixed' values are generally on the order of centimeters. You must have a 'Fixed' solution before proceeding. The message "Initializing, please wait" simply means the system is acquiring a 'Fixed' solution. If there is a problem with your radio link (the radio link icon has disappeared or the "No radio link" message is displayed), see Troubleshooting, below. If there is a positioning problem ("Searching for satellites," "Poor PDOP," or a continued 'Float' solution) move into a clearer area to increase the rover antenna's sky view. As stated before, you must track at least 5 satellites in common with the base receiver.
  12. To measure topo points:
    • Select Survey from the lower left of the main menu. Select "Measure points".
    • Name the point and enter the antenna information. Select "Measure". DO NOT MOVE UNTIL POINT IS STORED. If you have set 'Auto store point' to 'Yes' in the survey configuration, your point survey will automatically stop after the required time or when the required precision has been met. If you have set it to 'No,' you will have to end the point survey by selecting "End".
    • Continue to measure points as needed.
    • Hit the Menu or Esc key/option to return to the main menu.
  13. To measure points continuously (mapping):
    • Select Survey from the lower left of the main menu. Select "Continuous topo".
    • Select survey method (fixed time and/or distance). This will determine how frequently data are collected. Complete antenna information. Select time and/or distance interval. Points will be collected automatically based on this setting. Give a start point name; we highly recommend your point name ends in a number, as this last character will automatically be incremented in each point name.
    • Select "Measure" when ready.
    • Select "End" when done. Start and end point collection as much as needed.
    • Hit the Menu or Esc key/option to return to the main menu.
  14. To navigate to known points (stakeout):
    • Note: Not all Stakeout features will be available if you have not selected a coordinate projection in your survey style.
    • Select Survey from the lower left of the main menu. Select "Stakeout".
    • Select "Stakeout" -> "Points". If your point is not listed, select "Add" -> "Select from list". Select point(s), hit "Add". (You must select, not just highlight, a point.) Note that any point collected in your survey should be in your point list. Highlight the desired point from the new list; select "Stakeout". To add previously determined points to your survey, seeSpecific survey scenarios, Scenario 1: Use coordinates from a past survey, below.
    • Navigate to the point using the display. In 'coarse mode', walk forwards at a normal pace being careful not to rotate the range-pole. The arrow on the screen is only meaningful if you are moving, as the GPS antenna calculates direction based on how the antenna's position is changing. Begin moving and then follow the arrow. Once you are close to your point, the screen will switch to 'fine mode' and a bulls eye will appear. At this point, do not turn; navigate by moving only forward and backward or side to side.
    • If you want to record your location, select "Measure". Enter the point information and select "Measure" when done. When the solution is obtained, select "Store".
    • Hit the Menu or Esc key/option to return to the main menu.
  
Rover setup.

Ending the survey at the rover

  1. When you are done with your survey, press the Menu key to return to the main menu and select Survey from the lower left.
  2. Select "End Survey". You can start and end a survey in the same job as many times as you like. When asked "Power down receiver?" select "Yes".
  3. The message "Disconnect the cable from the controller" will appear. Disconnect the cable from the receiver and hit "OK".
  4. Power down the survey controller by pressing and holding the green power key for 2 seconds. Do NOT continue to press the power button after the survey contoller begins powering down - this will force a hard reset.
  5. If you have not already powered down the rover receiver, do so now by pressing and holding the green power button for 2 seconds. Do not continue to press the power button after the receiver has powered down.
  6. Disassemble the rover equipment in any order. To disconnect cables from ports 1-3 on the receiver, pull the connectors straight out using the small metal cable attached to the connector. If there is no attached cable, grasp the upper part (closest to the cable, not the receiver) and pull. Do not force the connectors and NEVER TWIST the connectors, as the pins inside may break.
  7. Return equipment to the original containers.

Ending the survey at the base

  1. There is no need to reconnect the survey controller to the base station. Simply power down the receiver by removing the power cord if using external power, or by pressing and holding the power button for 2 seconds if using internal batteries (do not continue to press the power button after the receiver has powered down).
  2. Remeasure the antenna height; check that the antenna is level and oriented to north. Note any problems with the antenna set-up.
  3. Disassemble the base equipment in any order. To disconnect cables from ports 1-3 on the receiver, pull the connectors straight out using the small metal cable attached to the connector. If there is no attached cable, grasp the upper part (closest to the cable, not the receiver) and pull. Do not force the connectors and NEVER TWIST the connectors, as the pins inside may break.
  4. Coil the cables carefully without kinking or twisting the cables. DO NOT coil the antenna cable around your arm, as this twists the cable.
  5. Return equipment to the original containers.

Troubleshooting

Getting set up for RTK surveys can be quite finicky. If you are having trouble getting your base and rover to communicate via radio link, address the following:
  • Are both the base and the rover set to CMR+ (in "Broadcast format" in the survey style on the controller)?
  • Is the correct antenna type in the survey style for both the base and the rover?
  • Is the correct radio type in the survey style for both the base and the rover?
  • Is the power setting for the base radio appropriate for the distance between the base and rover?
  • Do the base radio frequency and wireless mode settings match on the base and the rover?
  • Is the coordinate system appropriate for the region?
Power the receivers and survey controller off and then back on, and restart the base with the survey controller. Sometimes a power cycle is all that is needed.

Specific survey scenarios

Scenario 1: Use coordinates from a past survey.

There are two ways to add predetermined coordinates to a current job: Enter the coordinates by hand or upload the coordinates from Trimble Geomatics Office (TGO).
  • To enter coordinates by hand into the survey controller:
    1. Make sure you are in the right job. The job name appears across the top of the screen.
    2. From the main menu, select "Key in" -> "Points".
    3. Enter the point name and coordinate information. MAKE SURE YOU ARE IN THE CORRECT COORDINATE SYSTEM. If not, go to Options and change the coordinate view. The job will only support one coordinate system set; if your coordinates are given in a different coordinate system than you will be surveying in, you must convert the coordinates into the current system before entering them into the controller. You can use online tools or TGO for coordinate system conversions.
  • To upload coordinates using TGO:
    1. In TGO, open the project that you want to use. If your coordinates are in a spreadsheet and not a project, create a new job (see the Data Processing section), select Import -> Other Survey Files and select the appropriate data format. Choose the file, click Open. The points should appear on the screen if imported correctly. Select View-->Point Names to check.
    2. Connect the survey controller to the computer if it is not connected already (see the Data Processing section, below).
    3. Select Export from the left-hand menu. Select Survey Device. If using the UNAVCO RTK system, select Survey Controller on ActiveSync. Hit Open.
    4. You should see the controller's existing jobs listed, with the TGO project as the File name listed below. Click Save. The project should send.
    5. Check that the points were transferred to the survey controller from the survey controller main menu by selecting Files -> Open job -> select the newly imported job and hit Select. Again from the main menu, select Files -> Review current job. The points should be listed.
    6. If you want to add the newly imported points to an existing job rather than starting a new one, select Files from the main menu. Select Copy between jobs. Enter the job names and under Copy select Points. Hit Accept. When prompted, select the point set you would like copied.

Scenario 2: Reference current survey to a past survey when the base station is not set up over a previously surveyed marker. The previous survey is in grid coordinates (northing, easting, height) rather than WGS84 (latitude, longitude, height).

  1. Load the previous survey's grid coordinates onto the survey controller (see Scenario 1).
  2. Program the base with the survey controller to accept its position as "Here".
  3. Choose a previously surveyed point to serve as your reference point in the survey.
  4. Survey the reference point with the rover in WGS84 coordinates; name the site something different from what it was named before.
  5. Perform a calibration: After you have started your survey, select Survey in the low left of the main menu. Select 'Site calibration'. Select the GPS point (the newly surveyed point in WGS84). Select the grid point (previously survey version of the same point, in grid coordinates). Hit "OK".
The two points (new WGS84, old grid) now appear as one. You can now survey the other points relative to your reference point. By leaving the survey in grid mode, you can ulitize the map feature on the survey controller.

Back in the Lab

Downloading Data

There are several options for downloading data from the GPS receiver and the survey controller.

Option 1 (preferred method): Direct download from the receiver or survey controller using the Trimble Data Transfer Utility

You will need the Trimble Data Transfer Utility. If you do not already have it loaded onto your computer, you can dowload it for free from the Trimble website (http://www.trimble.com/datatransfer.shtml) or the UNAVCO Knowledgebase (http://facility.unavco.org/kb/questions/603/).

Screen shot of the Trimble Data Transfer Utility.
  1. Connect the receiver or survey controller to a PC using the communications cable (4700, 5700, R7, TSC1) or a USB cable and dongle (TSCe). The communications cable is a serial cable; if using a laptop, you may need to use a serial-to-USB adapter. Power up the computer and the receiver or survey controller. If using a TSCe, the following message should appear: "Connect to desktop?" Select "Yes". A Microsoft ActiveSync window should appear on your computer screen, readying "Connected". If you do not have Microsoft ActiveSync, download it for free from Microsoft (http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx).
  2. Open Trimble Data Transfer Utility.
  3. If you do not connect automatically ("Connected to ..". message in the upper right), select the device from which you'd like to transfer data. If your device is not listed in the drop-down menu:
    • Click the "Devices" button.
    • Select "New" (lower left).
    • Select device from list, click "Okay".
    • Select the computer's comm port that you are using, click "Next".
    • Enter a name for your device.
    • Set the serial port properties. Defaults should be fine; make sure "Data bits" = 8 and "Parity" = None. Click "Finish".
    • Click "Close" in the "Devices" window.
    • Your new device should now be added to the drop-down list.
    Click the button with the green check mark.
  4. Click "Add". In the "Open" window, browse for the folder you would like your data transfered into under "Destination".
  5. Select the file(s) you would like transfered. Note that the file(s) will be named for the job(s) you created. Click "Open".
  6. The selected file(s) should appear in the main Data Transfer Utility window. Click "Transfer All".
  7. Close the Data Transfer Utility program and disconnet the survey controller.
The program will automatically convert .t01 and .t00 files to .dat files; both file types will be transfered to your computer, along with metadata (the 'job' files). If you did not collect any raw data (rtk + infill), you will not have any .t01, .t00, or .dat files.

Option 2: Download from the CF or PCMCIA card (5700, R7, TSC1)

This option is the easiest, but is not recommended for transfering any data that has been collected with the survey controller because of the potential for losing metadata (see Option 1). You may want to use this method for downloading data from your base receiver, if you stored data.
  1. Insert the compact flash or PCMCIA card (TSC1 only) into the appropriate card reader connected to a computer.
  2. Select the files from the card that you wish to transfer; copy them to a directory on your computer.
  3. On your computer, right-click on the file(s). Select "Convert to .DAT". A .dat file for each file selected will be created in the same directory. You must have the Trimble Data Transfer Utility on your computer to have access to this option.
  4. Back up your data.

Data Processing

By pulling your data into Trimble Geomatics Office (TGO), you can view your survey and adjust the coordinate system as needed, and output points into a spreadsheet format. If you collected data for post-processing, see How to process fast-static and post-processing kinematic surveys using TGO (http://facility.unavco.org/kb/questions/613/).

Screen shot of Trimble Geomatics Office software.
  1. Open TGO. Select "New Project".
  2. Give the project a name. For template, select Metric. Click Okay.
  3. Change Project Properties as needed. In particular, click on the Coordinate System tab and change to the coordinate system used in your survey. Note that other properties can be easily adjusted after data import by selecting Projects from the left-hand menu/tab and then selecting Project Properties.
  4. The map should be blank. Select Import from the left-hand menu/tabs.
  5. Select Survey Controller DC File from the left-hand Import menu.
  6. Browse for and select your job (.dc) file and hit Open.
  7. Error messages are not uncommon and can often be ignored. Still, it's a good idea to review the import report to see if there is an understandable error.
  8. Your points should now be visible on the map. Blue lines indicate baselines, or distance and direction from the base station to the rover(s). Light blue baselines are 'Continuous' observations; dark blue baselines are 'Topo points'. Double-click on a point to see its coordinates or on a baseline to see error estimates and other information.
  9. A flag and the message "Low quality starting point" will appear over the base if you did not give the base its coordinates in the field. To change this base to known coordinates (and allow the other points to adjust accordingly), double-click on the base point. In the resulting window, click on the 'beach ball' in the upper right and select the appropriate coordinate system. Enter the desired coordinates and change the confidence levels in the drop-down menus on the right to Control Quality. Select the field coordinate (indicated with a 'beach ball') from the list on the left. Delete this coordinate by clicking the red 'x' in the upper right. This coordinate will still exist in your origninal job file. Close the Properties box. Select "Survey" from the upper menu and then "Recompute". The entire survey should now be adjusted for the correct base coordinates.
  10. Export your data in a comma delimited format appropriate for spreadsheets e.g. Excel. Select the Export menu/tab from the left-hand menu and then Pt,N,E,E,Code. Select Custom from the top tabs. Select the appropriate information for export (or select New format... and create your own combination), click OK.
  11. Close TGO when done. Your project is automatically saved.